Analysis of Compression Test for the Improved Filler from Blast Furnace Slag
DOI:
CSTR:
Author:
Affiliation:

Clc Number:

TU41

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Large-scale compression test for the improved filler from blast furnace slag by the large direct shear apparatus was carried out, and the confining deformation modulus of different stages in the loading, unloading and reloading was obtained. The research results show that water content has little influence on the compress- ibility of the filler, as there are few fine particles in the filler and the coarse particles have good water stability. Compression in the first stage of loading mainly results from smash of edges and corners and breaking off of long flat shape particles. The settlement calculation of the foundation should refer to the deformation modulus at the stage of reloading when the foundation is constructed by dynamic consolidation. The content of fine particles should be increased for the improved filler from blast furnace slag to reduce stress concentration of coarse parti- cles and make the best use of coherence of the flyash.

    Reference
    Related
    Cited by
Get Citation

黄大维,刘香,许有俊,徐丽阳.高炉渣改良填料压缩试验分析[J].华东交通大学学报英文版,2018,35(5):78-84.
Huang Dawei, Liu Xiang, Xu Youjun, Xu Liyang. Analysis of Compression Test for the Improved Filler from Blast Furnace Slag[J]. JOURNAL OF EAST CHINA JIAOTONG UNIVERSTTY,2018,35(5):78-84

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:
  • Revised:
  • Adopted:
  • Online: May 26,2021
  • Published:
Article QR Code