Effect of Isothermal Heat Treatment on the Semi-solid Microstructure of Light-Weight High Entropy Alloy AlMgLi0.5Zn0.5Cu0.2
CSTR:
Author:
Affiliation:

Clc Number:

TG166.4

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The semi-solid billet of light -high entropy alloy AlMgLi0.5Zn0.5Cu0.2 was prepared by isothermal heat treatment and the effects of holding temperature and holding time on the microstructure evolution of the lighthigh entropy alloy AlMgLi0.5Zn0.5Cu0.2 were investigated. The results show that with the increase of holding temperature, the average grain size of semi-solid light-weight high entropy alloy AlMgLi0.5Zn0.5Cu0.2 decreases first and then increases, while the roundness of the grains increases first and then decreases. With the prolongation of holding time, the average grain size and roundness of the light-weight high entropy alloy AlMgLi0.5Zn0.5Cu0.2 increase. The best semi-solid microstructure of the light-weight high entropy alloy AlMgLi0.5Zn0.5Cu0.2 was obtained at 460 ℃ for 60 min, whose average grain size is about 41 μm, roundness is 0.82, and coarsest coefficient K=20.95 μm3 /s.

    Reference
    Related
    Cited by
Get Citation

饶丽,金一豪,刘飞,赵龙志,胡勇.等温处理对AlMgLi0.5Zn0.5Cu0.2轻质高熵合金半固态组织影响[J].华东交通大学学报英文版,2022,39(5):97-104.
Rao Li, Jin Yihao, Liu Fei, Zhao Longzhi, Hu Yong. Effect of Isothermal Heat Treatment on the Semi-solid Microstructure of Light-Weight High Entropy Alloy AlMgLi0.5Zn0.5Cu0.2[J]. JOURNAL OF EAST CHINA JIAOTONG UNIVERSTTY,2022,39(5):97-104

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:
  • Revised:
  • Adopted:
  • Online: October 28,2022
  • Published:
Article QR Code